Hydraulic hoses

We can supply the following hydraulic hoses, components and services.

4 Wire hoses from 3/4" to 2"
We use the latest 4 wire hoses as a standard for most installations. The special carcass stops the expansion experienced with normal hoses, to such an extent that hose runs of up to 40 metres can be used without the need for expensive solid pipework. Each hose can have a large variety of ends swaged onto them as required.

2 Wire hoses from 1/4" to 2"
2 wire hoses can also be supplied to suit any application, size and length. Hoses can be pressure tested and supplied along with a variety of hose ends and clamps.

Solid pipework 1" to 2"
Solid pipework can be supplied to suit a flow of up to 600 litres inclusive of elbows, straight couplers, male stud couplings and clamps. Each length of pipe can be pre-cut to suit your exact needs and lessen installation time.
Also, a range of preformed bends can be ordered, reducing the need for expensive elbows which can cause friction, heat and pressure drops.

Hose and pipework clamps 1/4" to 2"
A range of clamps include sound and isolating ‘stauff’ clamps which reduce noise transfer through a building, or ‘p’ clamps where sound issues and hose support are not a problem.

Hose pressure testing
All our hydraulic 2 wire and 4 wire hoses can be pressure tested up to 250 and 500 bar respectively, individually marked at each end and supplied along with a laminated test certificate.